Adsorption Efficiency Investigation of Polyacrylonitrile for Methyl Green Dye from Aqueous Solution
DOI:
https://doi.org/10.30526/38.1.3520Keywords:
Methyl green, polyacrylonitrile, adsorption, isotherm, maximum capacityAbstract
Due to several environmental contaminants, the textile industry's wastewater disposal presents significant dangers, including to drinkable water. This study aims to synthesize polyacrylonitrile (PAN) and examine how well it adsorbs methyl green color from aqueous solutions. The synthesis steps were performed after the PAN was characterized using various techniques, including FTIR, SEM, EDS, TGA-DSC, and XRD. Research was conducted on the quantity of adsorbent utilized, the initial concentration, and the contact time. All of these factors were shown to impact the adsorption process. The findings indicated that a dose of 0.01 g, an initial concentration of 30 mg/L, and a contact duration of 60 minutes produced the best results with the adsorbent. Using the Langmuir and Freundlich adsorption model, the maximum adsorption capacity was calculated to be 1604.837 mg/g. After applying Freundlich Langmuir and isotherm models to experimental adsorption data, the estimates made by the Freundlich model were more consistent with the experiments' actual results; thermodynamic analysis examined adsorption properties.
References
1. Karim AB, Mounir B, Hachkar M, Bakasse M, Yaacoubi A. Removal of basic red 46 dye from aqueous solution by adsorption onto Moroccan clay. J Hazard Mater. 2009; 168(1):304-309. https://doi.org/10.1016/j.jhazmat.2009.02.028.
2. Souza C, Majuste D, Dantas MS, Ciminelli VS. Selective adsorption of gold over copper cyanocomplexes on activated carbon. Hydrometallurgy. 2014; 147(1):188-195. https://doi.org/10.1016/j.hydromet.2014.05.017.
3. Haddou N, Ghezzar MR, Abdelmalek F, Ognier S, Martel M, Addou A. Plasmacatalytic removal of lead acetate assisted by precipitation. Chemosphere. 2014; 107(1):304-310. https://doi.org/10.1016/j.chemosphere.2013.12.071.
4. Wang LY, Lee MS. Separation of Zr and Hf from sulfuric acid solutions with amine-based extractants by solvent extraction. Sep Purif Technol. 2015; 142(4):83-89. https://doi.org/10.1016/j.seppur.2015.01.001.
5. Zulhairun AK, Ismail AF. The role of layered silicate loadings and their dispersion states on the gas separation performance of mixed matrix membrane. J Membr Sci. 2014;468(15):20-30. https://doi.org/10.1016/j.memsci.2014.05.038.
6. Tabaraki R, Nateghi A, Ahmady-Asbchin S. Biosorption of lead (II) ions on Sargassum ilicifolium: application of response surface methodology. Int Biodeterior Biodegrad. 2014; 93(1):145-152. https://doi.org/10.1016/j.ibiod.2014.03.022.
7. Yuan M, He H, Xiao L, Zhong T, Liu H, Li S, Deng P, Ye Z, Jing Y. Enhancement of Cd phytoextraction by two Amaranthus species with endophytic Rahnella sp. JN27. Chemosphere. 2014; 103(1):99-104. https://doi.org/10.1016/j.chemosphere.2013.11.040.
8. Malana MA, Ijaz S, Ashiq MN. Removal of various dyes from aqueous media onto polymeric gels by adsorption process: their kinetics and thermodynamics. Desalination. 2010; 263(1-3):249-257. https://doi.org/10.1016/j.desal.2010.06.066.
9. Ghati, S. K. Removal of Chlorpyrifos (Dursban) pesticide from aqueous solutions using barley husks. IHJPAS. 2017; 29(3):54-68.
10. Özavci S, Çetın B. Determination of radiation attenuation coefficients in concretes containing different wastes. Acta Physica Polonica A. 2016; 130(1):316-317. http://dx.doi.org/10.12693/APhysPolA.130.316.
11. Akarslan F, Altinay Ö. Investigation on water retention properties of boric acid doped textile surfaces. Acta Physica Polonica A. 2015; 128(2B):405-406. http://dx.doi.org/10.12693/APhysPolA.128.B-405.
12. Jawad H, Abbas AM. Study of efficacy adsorption of methyl green by attapulgite and modified attapulgite clay from aqueous solution. IHJPAS. 2021; 34(1):19-29. https://doi.org/10.30526/34.1.2550.
13. Abbas AM, Abd SS, Himdan TA. Kinetic study of methyl green dye adsorption from aqueous solution by bauxite clay at different temperatures. IHJPAS. 2018; 31(1):58-66. https://doi.org/10.30526/31.1.1853.
14. Jadoo SA, Naser JA. Adsorption thermodynamic study of Congo red dye on electrospun nanofibers mat of polyacrylonitrile. JGPT. 2019; 11(7):401-411. https://doi.org/10.1088/1757-899x/928/5/052024.
15. Naser JA, Ahmed ZW, Ali EH. Nanomaterials usage as adsorbents for the pollutants removal from wastewater; A review. Materials Today: Proceedings. 2021; 42(1):2590-2595. https://doi.org/10.1016/j.matpr.2020.12.584.
16. Naser JA, Himdan TA, Ibraheim AJ. Adsorption kinetic of malachite green dye from aqueous solutions by electrospun nanofiber Mat. Orient J Chem. 2017; 33(6):3121-3129. https://doi.org/10.13005/ojc/330654.
17. Manocha LM, Bahl OP. Influence of carbon fiber type and weave pattern on the development of 2D carbon-carbon composites. Carbon. 1988; 26(1):13-21. https://doi.org/10.1016/0008-6223(88)90004-8.
18. Fallahi D, Rafizadeh M, Mohammadi N, Vahidi B. Effect of LiCl and non-ionic surfactant on morphology of polystyrene electrospun nanofibers. e-Polymers. 2008; 18(056):1-10. https://doi.org/10.1515/epoly.2008.8.1.644.
19. Jadoo SA, Naser JA. Adsorption optimization of congo red dye onto electrospun nanofibers of polyacrylonitrile functionalized with Fe3O4 nanoparticles. In IOP Conf Ser Mater Sci Eng. 2020; 928(052024):1-17. https://doi.org/10.1088/1757-899x/928/5/052024.
20. Zhou W, Zhang Y, Du S, Chen X, Qi K, Wu T, Li J, Cui S, He J. Superwettable amidoximed polyacrylonitrile-based nanofibrous nonwovens for rapid and highly efficient separation of oil/water emulsions. ACS Appl Polym Mater. 2021; 3(6):3093-102. https://doi.org/10.1021/acsapm.1c00313.
21. Al-heetimi DT, Dawood AH, Khalaf QZ, Himdan TA. Removal of methyl orange from aqueous solution by Iraqi bentonite adsorbent. IHJPAS. 2017; 25(2):328-339. Available from: https://doi.org/10.30526/25.2.1853.
22. Al-Dulaimy ZA. Adsorption of bromo phenol red dye from aqueous solution by Iraqi bentonite clay. IHJPAS. 2017; 30(1):118-130. https://doi.org/10.30526/30.1.1065.
23. Mahmood, OAA, Waisi BIS. Synthesis and characterization of polyacrylonitrile based precursor beads for the removal of the dye malachite green from its aqueous solutions. Desalin. Water Treat. 2021; 216:445-455. https://doi.org/10.5004/dwt.2021.26906.
24. Fallahi, D, Rafizadeh, M, Mohammadi, N, Vahidi, B. Effect of applied voltage on jet electric current and flow rate in electrospinning of polyacrylonitrile solutions. Polymer international. 2008; 57(12):1363-1368. https://doi.org/10.1002/pi.2482.
25. Ravi VP, Jasra RV, Bhat TS. Adsorption of phenol, cresol isomers and benzyl alcohol from aqueous solution on activated carbon at 278, 298 and 323 K. J Chem Technol Biotechno. 1998; 71(2):173-179.https://doi.org/10.1002/(SICI)1097-4660(199802)71:2%3C173::AID-JCTB818%3E3.0.CO;2-N.
26. Mohammed AJ, Naser JA. Adsorption ability study of yellow (W6GS) dye from aqueous solution by Iraqi siliceous rocks. Poll Res. 2021; 40(1):58-62.
27. Saed UA. Batch and continuous adsorption of chromium (vi) from aqueous solution using alhagi forks and tea husk. Al-Nahrain J Eng Sci. 2016; 19(1):98-106. https://www.iasj.net/iasj/download/085d7427f4d825f1.
28. Nasuha N, Hameed BH. Adsorption of methylene blue from aqueous solution onto NaOH-modified rejected tea. Chemical engineering journal. 2011; 166(2):783-786. https://doi.org/10.1016/j.cej.2010.11.012.
29. Naser JA, Al-ani FA, Radhi IM, Himdan TA. Kinetic study of adsorption of malachite green dye on poly aniline-formaldehyde/chitosan composite. In IOP Conf Ser Mater Sci Eng. 2020; 928:052005. https://doi.org/0.1088/1757-899X/928/5/052005.
30. Radhi, IM, Mohammed YI, Himdan TA, Badri DH. Adsorption of tetracycline on the bauxite and modified bauxite at different temperatures. IHJPAS. 2017; 30(3):150-157. https://doi.org/10.30526/30.3.1609.
Downloads
Published
Issue
Section
License
Copyright (c) 2025 Ibn AL-Haitham Journal For Pure and Applied Sciences
This work is licensed under a Creative Commons Attribution 4.0 International License.
licenseTerms