Effect of Dielectric Barrier Discharge (DBD) Plasma on Structural and Electrical Properties of Polypyrrole (PPy) Thin Films
DOI:
https://doi.org/10.30526/39.4.4367Keywords:
Cold Plasma, Polypyrrole, X-ray diffraction, Hall effectAbstract
Cold plasma treatment is an effective approach for surface modification of conducting polymers, enabling the tuning of their structural and electronic properties without altering the bulk composition. In this work, polypyrrole (PPy) thin films were fabricated on indium tin oxide (ITO) substrates via electrochemical deposition. The films were subsequently exposed to dielectric barrier discharge (DBD) cold plasma for different exposure times (0, 5, 10, 15, and 20 min). The structural modifications induced by plasma treatment were investigated using X-ray diffraction (XRD), while the electrical and charge transport properties were analyzed using Hall effect measurements. The XRD results revealed significant changes in peak intensity and crystallinity, indicating surface activation and partial reorganization of polymer chains upon plasma exposure. Hall effect measurements showed systematic variations in carrier concentration, mobility, and electrical conductivity as a function of plasma treatment time, confirming the strong influence of surface modification on charge transport behavior in PPy films. The results demonstrate that DBD cold plasma treatment provides a controllable and effective route for enhancing the structural ordering and electrical performance of electrochemically deposited PPy thin films, making them promising for applications in sensors, optoelectronic devices, and flexible electronics.
References
1. Inoue MB, Nebesny KW, Fernando Q, Castillo-Ortega MM, Inoue M. Complexation of electroconducting polypyrrole with copper. Synth Met.1990;38(2):205–212. https://doi.org/10.1016/0379-6779(90)90105-T
2. Omastová M, Kosina S, Pionteck J, Janke A, Pavlinec J. Electrical properties and stability of polypyrrole containing conducting polymer composites. Synth Met. 1996;81(1):49–57. https://doi.org/10.1016/0379-6779(96)80228-1
3. Guerchouche K, Herth E, Calvet LE, Roland N, Loyez C. Conductive polymer based antenna for wireless green sensors applications. Microelectronic Eng. 2017;182:46–52. https://doi.org/10.1016/j.mee.2017.08.007
4. Jain R, Jadon N, Pawaiya A. Polypyrrole based next generation electrochemical sensors and biosensors: A review. TrAC Trends Anal Chem. 2017;97:363–373. https://doi.org/10.1016/j.trac.2017.10.009
5. Yue B, Wang C, Ding X, Wallace GG. Electrochemically synthesized stretchable polypyrrole/fabric electrodes for supercapacitor. Electrochimica Acta. 2013;113:17–22. https://doi.org/10.1016/j.electacta.2013.09.024
6. Guimard NK, Gomez N, Schmidt CE. Conducting polymers in biomedical engineering. Prog Polym. Sci. 2007;32(8–9):876–921. https://doi.org/10.1016/j.progpolymsci.2007.05.012
7. Wysocka-Żołopa M, Winkler K. Electrochemical synthesis and properties of conical polypyrrole structures. Electrochim Acta. 2017;258:1421–1434. https://doi.org/10.1016/j.electacta.2017.12.005
8. Pringle JM, Efthimiadis J, Howlett PC, MacFarlane DR, Chaplin AB. Electrochemical synthesis of polypyrrole in ionic liquids. Polymer. 2004;45(5):1447–1453. https://doi.org/10.1016/j.polymer.2004.01.006
9. Kojabad ZD, Shojaosadati SA. Chemical synthesis of polypyrrole nanostructures: Optimization and applications for neural microelectrodes. Mater Des. 2016;96:378–384. https://doi.org/10.1016/j.matdes.2016.02.045
10. Agobi AU, Ekpunobi AJ, Ikeuba AI, Ikhioya IL, Ozoemena CN, Udofia KI. Hybrid polypyrrole/copper/graphene oxide nanocomposite films synthesized via potentiostatic deposition with enhanced photovoltaic properties. J Indian Chem Soc. 2022;99(7):100549. https://doi.org/10.1016/j.jics.2022.10054911
11. Gao R, He H, Yang X, Wang W, Gao J, Yang C. Cold atmospheric plasma and skin wound healing: influence on microbial diversity and composition. BMC Microbiol. 2025;25:260. https://doi.org/10.1186/s12866-025-03965-x
12. Konuma M. Film Deposition by Plasma Techniques. Springer; 2012. https://doi.org/10.1007/978-3-642-56617-9
13. Roth JR. Applications to nonthermal plasma processing. IEEE Trans Plasma Sci. 2001;29(2):131–139.
14. Favia P, Oehr C, Wertheimer MR. Plasma processes and polymers. Wiley-VCH; 2005.
15. Kusano Y. Atmospheric pressure plasma processing for polymer adhesion: A review. J of Adhes. 2014;90(9):755–777. https://doi.org/10.1080/00218464.2013.804407
16. Thomas M, Mittal KL. Atmospheric Pressure Plasma Treatment of Polymers. Wiley; 2013. https://doi.org/10.1002/9781118590064
17. Bárdos L, Baránková H. Cold atmospheric plasma: Sources, processes, and applications. Thin Solid Films. 2010;518(23):6705–6713. https://doi.org/10.1016/j.tsf.2010.07.044
18. Cullen PJ, Lalor J, Scally L, Boehm D, Milosavljević V, Bourke P. Translation of plasma technology from the lab to the food industry. Plasma Processes . Polym. 2018;15(2):1700085. https://doi.org/10.1002/ppap.201700085
19. Abdullah K, Kadhem SJ. Effect of dielectric barrier discharge plasma on bacterial inhibition. Iraqi J Phys. 2025;23(4):98–104. https://doi.org/10.30723/ijp.v23i4.1353
20. Ollegott K, Wirth P, Oberste-Beulmann C, Awakowicz P, Muhler M. Dielectric barrier discharges in plasma-catalytic processes. Chem Ing Tech. 2020;92(10):1542–1558. https://doi.org/10.1002/cite.202000075
21. Stryczewska HD. Supply systems of non-thermal plasma reactors. Appl Sci . 2020;10(9):3242. https://doi.org/10.3390/app10093242
22. Izadjoo M, Zack S, Kim H, Skiba J. Medical applications of cold atmospheric plasma J Wound Care. 2018;27(Sup9):S4–S10. https://doi.org/10.12968/jowc.2018.27.Sup9.S4
23. Laroussi M. Plasma medicine: A brief introduction. Plasma. 2018;1(1):47–60. https://doi.org/10.3390/plasma1010005
24. Feng X, Huang H, Ye Q, Zhu J-J, Hou W. Ag/polypyrrole core–shell nanostructures. J Phys Chem C. 2007;111(24):8463–8468. https://doi.org/10.1021/jp071140z
25. Kondyurin A, Tsoutas K, Latour Q-X, Higgins MJ, Moulton SE, McKenzie DR. Structural analysis of plasma-modified polypyrrole films. ACS Biomater. Sci and Eng. 2017;3(10):2247–2258. https://doi.org/10.1021/acsbiomaterials.7b00369
26. Nickels JD, Schmidt CE. Surface modification of polypyrrole via affinity peptides. J Mater Chem B. 2013;1(7):1060–1066. https://doi.org/10.1039/C2TB00269H
27. Morent R, De Geyter N, Desmet T, Dubruel P, Leys C. Plasma surface modification of polymers: A review. Plasma Process Polym. 2011;8(3):171–190. https://doi.org/10.1002/ppap.201000153
28. Borcia C, Borcia G, Dumitrascu N. Relating plasma surface modification to polymer characteristics. Appl Phys A. 2008;90(3):507–515. https://doi.org/10.1007/s00339-007-4313-1
29. Dufour T. Plasma-modified and plasma-synthesized polymer films. Polymers. 2023;15(17):3607. https://doi.org/10.3390/polym15173607
30. Yoshida S, Hagiwara K, Hasebe T, Hotta A. Surface modification of polymers by plasma treatments. Surf Coat Technol. 2013;233:99–107. https://doi.org/10.1016/j.surfcoat.2013.02.042
31. Omastová M, Trchová M, Kovářová J, Stejskal J. Synthesis and structural study of polypyrroles prepared in the presence of surfactants. Synth met. 2003;138(3):447-55 https://doi.org/10.1016/S0379-6779(02)00498-8
32. Stejskal J, Omastova M, Fedorova S, Prokeš J, Trchová M. Polyaniline and polypyrrole prepared in the presence of surfactants: a comparative conductivity study. Polymer. 2003;44(5):1353-8. https://doi.org/10.1016/S0032-3861(02)00906-0
33. Heeger AJ. Semiconducting and metallic polymers: the fourth generation of polymeric materials. ACS .Publications; 2001. p. 8475-91. https://doi.org/10.1021/jp011611w
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Ibn AL-Haitham Journal For Pure and Applied Sciences
This work is licensed under a Creative Commons Attribution 4.0 International License.
licenseTermsHow to Cite
